Sheffield Pallet Racking FAQs
We’ve answered the most popular questions about our pallet racking installation services in Sheffield. For anything else, or to get a free quote, please give us a call on 0845 689 1300.
Which Areas Of Sheffield Do You Install Pallet Racking In?
We install pallet racking across Sheffield, where much of the city’s warehousing sits in the north east along the M1. Sheffield Business Park covers around 200 acres off Junctions 33 and 34 and sits within the Advanced Manufacturing and Innovation District. Close by, Bessemer Park has been developed next to Junction 34 on the former Outokumpu steel site off Shepcote Lane. Further north, Smithy Wood at Junction 35 has brought new industrial space to the Chapeltown area. We also work in Tinsley, Darnall, Attercliffe and along the Parkway, as well as across Rotherham, Barnsley and Doncaster. Wherever your unit is, every project starts with a free site survey. That way your pallet racking is designed around your building, stock and handling equipment rather than a standard layout.
Can Warehouse Racking Be Installed In An Older Industrial Building In Sheffield?
Yes, but older buildings need a closer look before any warehouse racking goes in. Much of Sheffield’s industrial stock in the Lower Don Valley and Attercliffe was built for steel and engineering work rather than palletised storage. Other older buildings are being converted too. The former B&Q warehouse on Greenland Road in Darnall, for example, is being redeveloped into industrial and logistics space. Buildings like these can have uneven or patched floor slabs, irregular column grids, lower eaves or redundant crane rails and pits. During our survey we check floor condition and fixing points, map columns and obstructions and confirm the clear height to the roof steel or sprinklers. Where the building needs work first, our warehouse refurbishment service can prepare the space before installation.
What Pallet Racking Suits A New Build Unit Near The M1 In Sheffield?
New units near the M1 are generally designed with storage in mind, with flat floors, wide clear spans and plenty of height. New units marketed on Europa Link, for example, offer eaves heights of up to 18 metres. In a building like that, standard selective racking can leave a lot of usable height empty. VNA racking makes the most of tall, flat buildings by combining narrow aisles with guided trucks and storing pallets high. Wide aisle selective racking still suits operations with lots of product lines and frequent picking. If you are moving into a unit that is still under construction, involve us early. We can then plan the racking alongside the floor and sprinkler design rather than working around them afterwards.
Do You Install Cantilever Racking In Sheffield For Steel And Metal Stock?
Yes. Sheffield still has a large base of metals stockholders, fabricators and engineering firms. Long or awkward stock such as steel bar, tube, section and sheet doesn’t suit a standard pallet bay. Cantilever racking uses single upright columns with arms projecting from them. This leaves the front face clear, so long lengths can be loaded from the side by forklift or overhead crane. The arms can be set at different heights to suit mixed stock, and heavy duty versions are built for the high point loads that steel creates. Single sided runs work well along a wall, while double sided runs make good use of a central bay. We assess your stock lengths, weights and handling method on site before recommending a layout.
How Do I Choose A Warehouse Racking Installer In Sheffield?
Start with the basics. Check how long the installer has been trading, whether they carry out their own site surveys and whether they can show completed projects similar to yours. You can see examples of our work in our case studies. A good warehouse racking installer in Sheffield should provide load calculations, load notices and anchor specifications as standard. They should also carry suitable insurance and work in line with the CDM Regulations 2015. It’s worth asking who will actually be on site. Our installation teams travel straight up the M1 to Sheffield and South Yorkshire, so the team that surveys and designs your system also builds it. Finally, check what support is available after handover, such as inspections and repairs.
How Much Does Pallet Racking Cost In Sheffield?
Pallet racking prices in Sheffield depend on several factors:
- the system type
- the number of bays and beam levels
- the load capacity
- how much preparation the building needs
Selective racking is usually the lowest cost per pallet position. VNA, shuttle and mobile systems cost more upfront but store more pallets in the same footprint. Many Sheffield buyers also consider second hand racking. It can reduce the initial outlay, but used components need checking for damage and compatibility. You may also not get the original load data, which is needed to set safe working loads. Older buildings may need floor work before installation, which affects the overall budget. The most accurate route is a free site survey followed by a detailed, itemised quote.
Do You Inspect And Repair Pallet Racking In Sheffield?
Yes. Busy Sheffield distribution sites with high volumes of forklift movements see regular impact damage to uprights and beams. Annual inspections by a technically competent person are recommended, alongside regular checks by your own trained staff. Our pallet racking inspections cover every bay. You get a written report that grades the damage and sets out what needs doing and how urgently. Where damage is found, our pallet racking repair team can replace uprights, beams and other components and restore bays to their rated capacity. We can also set up a regular inspection schedule for sites across Sheffield and South Yorkshire so checks are never missed.
