Winter puts pressure on every part of a warehouse. Temperatures drop, days get shorter, floors get wetter and for many operations it is also the busiest time of the year. Each of these adds risk to your staff, your stock and your storage equipment.
This guide covers what UK warehouse temperature regulations require, how to keep staff safe in cold conditions and the checks your pallet racking, doors, floors and equipment need before the weather turns.
Warehouse Temperature Regulations in the UK
Warehouse temperature regulations in the UK come from Regulation 7 of the Workplace (Health, Safety and Welfare) Regulations 1992. It requires the temperature in indoor workplaces to be reasonable during working hours, and employers must provide enough thermometers for staff to check it.
Is there a minimum working temperature in the UK?
There is no fixed legal minimum working temperature in the UK. However, the Approved Code of Practice that accompanies the regulations sets out the following guidance:
- At least 16°C for most indoor workplaces
- At least 13°C where work involves rigorous physical effort, which covers a lot of warehouse activity such as manual picking and loading
Many warehouses cannot realistically reach these temperatures, particularly large buildings with open dock doors or chilled and frozen stores. In these cases, employers are expected to do what is reasonably practicable to keep staff comfortable. This usually means local heating in fixed work areas such as packing benches, suitable protective clothing, warm rest areas and limits on how long staff spend in the coldest zones. These measures should be recorded in your risk assessment and reviewed before winter.
Warehouse temperature monitoring
Temperature varies more than many managers expect. Warm air rises, so the top of a high bay warehouse can be several degrees warmer than the floor, while areas near loading doors are colder still. Warehouse temperature monitoring with sensors at different heights and locations gives you a clear picture of these differences.
This matters for stock as well as staff. Products such as paints, adhesives, sealants, liquids and some foods can be damaged by freezing, so they should be stored away from doors and external walls. High volume, low speed (HVLS) fans can also help by pushing warm air back down to working level, which makes heating more effective and evens out temperatures across the building.
Protecting Staff in Cold Conditions
Your team is your most important asset, and cold conditions raise the risk of illness, fatigue and injury. Prolonged exposure can lead to cold stress and, in extreme cases, hypothermia. Practical steps include:
- Suitable clothing: insulated jackets, thermal layers, hats, waterproof safety boots and gloves that keep hands warm without reducing grip
- Warm rest areas: a heated space where staff can take regular breaks and get hot drinks
- Job rotation: moving staff between colder and warmer tasks so nobody spends a full shift in the coldest zones
- Warming up before lifting: cold muscles and joints are more prone to strain, so short stretches before manual handling help reduce injuries
- Seasonal inductions: many warehouses take on temporary or agency staff over winter, so make sure new starters understand cold weather procedures, traffic routes and racking safety from day one
Winter Risks to Your Pallet Racking
Pallet racking is built to be strong, but winter brings several risks that can weaken it over time or cause sudden damage.
Condensation and corrosion
When dock doors open and close throughout the day, warm and cold air mix and condensation forms on steel surfaces. Over a season, this moisture can lead to corrosion, particularly on base plates, lower beams and uprights closest to the doors. Check these areas for rust and flaking paint, and consider galvanised racking for unheated buildings or semi outdoor areas. If you run chilled or frozen operations, specialist pallet racking for cold storage is designed to cope with low temperatures and constant temperature changes.
More impacts during peak season
Winter often brings higher stock levels, busier shifts and less experienced drivers, while wet floors increase forklift stopping distances. Together, these make collisions with racking more likely. Ask staff to report every impact straight away, however minor, and increase the frequency of internal checks during your busiest weeks.
Inspections and repairs before the rush
HSE guidance recommends that racking is inspected by a technically competent person at least once every 12 months, alongside regular internal checks by your Person Responsible for Racking Safety (PRRS). Booking your pallet racking inspections in autumn means any damage is found and fixed before peak season. Damaged uprights or beams should be offloaded and isolated until professional pallet racking repair has been completed.
Overloading
When stock builds up ahead of busy periods, it can be tempting to push racking beyond its limits. Make sure load notices are clearly displayed on every run and that pallets are placed evenly and squarely on beams.
Outdoor racking and snow
Outdoor systems such as roofed cantilever racking in builders merchants and timber yards need extra attention. Heavy snow adds weight to roof sheets and stored materials, so clear build ups promptly and check that roofs, cladding and fixings are secure before winter storms.
Check Doors, Roofs and Loading Bays
Autumn is the time to make sure the building itself is ready for wind, rain and cold.
- Roofs: look for leaks, stains and cracks, and check that flat roofs drain properly rather than holding standing water
- Gutters and downpipes: clear leaves and debris so water drains away from the building
- Doors: with doors closed, look for daylight or drafts around the edges and replace worn seals
- Heat loss at loading bays: rapid roll doors, dock shelters and air curtains all reduce the amount of warm air lost each time a door opens
- External areas: plan gritting for yard routes, pedestrian walkways and dock approaches before the first frost
Service Forklifts and Equipment
Cold weather is hard on handling equipment, so service forklifts, reach trucks and pallet trucks before the season starts. Pay particular attention to:
- Batteries: electric truck batteries lose capacity in the cold, so charge them in a heated area where possible and check their condition before peak season
- Tyres and brakes: worn tyres and brakes are more dangerous on damp floors
- Lights and warning devices: check headlights, beacons and reversing alarms on every truck
- LPG trucks: store cylinders in line with supplier guidance and check connections and regulators
- Heaters: have portable and fixed heaters checked before use, and keep them well away from stored goods and racking
Floors, Lighting and Shorter Days
Rain and snow carried in on boots, pallets and trucks quickly turn warehouse floors into slip hazards. Place absorbent mats at every entrance, clean up standing water straight away and use warning signs where floors are wet. Keep floor markings and walkways clearly visible so pedestrians and vehicles stay separated.
Shorter days also mean more time working under artificial light. Replace failed lamps in aisles and on racking runs, test emergency lighting and check that external lighting covers yards, car parks and loading bays. If dark mornings and evenings affect collection and delivery times, agree revised schedules with hauliers in advance, and make sure your own drivers carry winter emergency kits.
Your Winter Warehouse Checklist
- Review your risk assessment against warehouse temperature regulations and the 16°C and 13°C guidance
- Install thermometers or temperature sensors at different heights and near doors
- Move freeze sensitive stock away from doors and external walls
- Provide winter PPE, warm rest areas and job rotation for staff
- Book your annual racking inspection and complete any outstanding repairs
- Check racking near doors for condensation and corrosion
- Confirm load notices are displayed and pallets are placed correctly
- Inspect roofs, gutters, doors and seals
- Plan gritting for yards, walkways and dock approaches
- Service forklifts and check batteries, tyres, brakes and lights
- Put entrance mats and wet floor procedures in place
- Test internal, external and emergency lighting
Get Your Warehouse Ready for Winter
We cannot control the weather, but planning ahead keeps your staff safe, protects your stock and helps your operation run smoothly through the busiest months of the year.
If your racking needs inspecting, repairing or upgrading before peak season, Logical Storage Solutions designs, installs and maintains pallet racking for warehouses across the UK.
Contact our team today for straightforward advice and a no obligation quote.
